head_banner

1J50 Soft magnetic alloy thin strip is suitable for high frequency under several MHz

1J50 Soft magnetic alloy thin strip is suitable for high frequency under several MHz

Short Description:

1J50 is a nickel–iron magnetic alloy, with about 50% nickel and 48% iron content. It is derived in accordance with permalloy. It has characteristics of high permeability and high saturation magnetic flux density.


Product Detail

Our Advantage

Product Tags

1J50  (Soft magnetic alloy)
(Common Name: Ni50, E11a, 50H, Hy-Ra49, PB)

1J50 is a nickel–iron magnetic alloy, with about 50% nickel and 48% iron content. It is derived in accordance with permalloy. It has characteristics of high permeability and high saturation magnetic flux density.

Alloy melting in a vacuum medium, cast into ingots, after hot forging blanks made of sheet metal, and then after hot rolling, pickling, surface treatment, cold rolling into finished products.

1J50 Iron-nickel alloy( soft magnetic alloy) mostly in an alternating magnetic field used mainly for high magnetic yoke, sensitive relays, low-loss micro-motor, small power transformers, pulse transformer, transistor switches, magnetic amplifier magnetic modulator, sensitive signal input and output transformers, magnetic heading aviation instrumentation magnetic sensor, magnetic susceptibility measurement instrument components, precision meter movable piece and the stator magnetic shielding and magnetic temperature compensation element.

Normal composition%

Ni 49.0~51.0 Fe Bal. Mn 0.3~0.6 Si 0.15~0.3
Mo - Cu ≤0.2
C ≤0.03 P ≤0.02 S ≤0.02

Typical Mechanical properties

Yield strength Tensile Strength Elongation
Mpa Mpa %
685 780 3~35

Typical Physical properties

Density (g/cm3) 8.2
Electrical resistivity at 20℃(Ωmm2/m) 0.45
Coefficient of linear expansion(20℃~200℃)X10-6/℃ 9,2
Saturation magnetostriction coefficient λθ/ 10-6 25,0
Curie point   Tc/ ℃ 500
The magnetic properties of alloys with high permeability in weak fields
1J50 Initial permeability Maximum permeability Coercivity Saturation magnetic induction intensity
Сold-rolled strip/ sheet.
Thickness, mm
μ0.08/ (mH/m) μm/ (mH/m) Hc/ (A/m) BS/ T
0.05 mm 2.5 35 20 1.5
0.1~0.19 mm 3.8 43.8 12
0.2~0.34 mm 4.4 56.3 10.4
0.35~1.0 mm 5.0 65 8.8
1.1~2.5 mm 3.8 44.0 12
Bar
8-100 mm 3.1 25.0 24
Mode of heat treatment  1J50
Annealing media Vacuum with a residual pressure not higher than 0.1Pa, hydrogen with a dew point of not higher than minus 40 ℃.
The heating temperature and rate 1100~1150℃
Holding time/h 3~6
Cooling rate With 100 ~ 200 ℃/ h cooled to 600 ℃, Rapid cooling to 300 baked

Style of supply

Alloys Name Type Dimension
1J50 Wire D= 0.1~8mm
Strip W= 8~390mm T= 0.3mm
Foil W= 10~100mm T= 0.01~0.1
Bar Dia= 8~100mm L= 50~1000

  • Previous:
  • Next:

  • #1 SIZE RANGE
    Large size range from 0.025mm (.001”) to 21mm (0.827”)

    #2 QUANTITY
    Order Quantity ranging from 1 kg to 10 tonnes
    At Cheng Yuan Alloy, we take great pride in customer satisfaction and frequently discuss individual requirements, offering a tailored solution through manufacturing flexibility and technical knowledge.

    #3 DELIVERY
    Delivery within 3 weeks
    We typically manufacture your order and ship within 3 weeks, delivering our products to more than 55 countries across the world.

    Our lead times are short because we stock in excess of 200 tonnes of more than 60 ‘High Performance’ alloys and, if your finished product is not available from stock, we can manufacture within 3 weeks to your specification.

    We take pride in our more than 95% on time delivery performance, as we are always striving for excellent customer satisfaction.

    All wire, bars, strip, sheet or wire mesh are securely packed suitable for transporting by road, air courier or sea, with available in coils, spools and cut lengths. All items are clearly labelled with the order number, alloy, dimensions, weight, cast number and date.
    There is also the option to supply neutral packaging or labelling featuring the customer’s branding and company logo.

    #4 BESPOKE MANUFACTURING
    Order is manufactured to your specification
    We produce wire, bar, flat wire, strip, sheet to your exact specification and in exactly the quantity you are looking for.
    With a range of 50 Exotic Alloys available, we can provide the ideal alloy wire with specialist properties best suited to your chosen application.
    Our alloy products, such as the corrosion resistant Inconel® 625 Alloy, is designed for aqueous and off-shore environments, while the Inconel® 718 alloy offers superior mechanical properties in low and sub-zero temperature environments. We also have high strength, hot cutting wire ideal for high temperatures and perfect for cutting polystyrene (EPS) and heat sealing (PP) food bags.
    Our knowledge of the industry sectors and state-of-the-art machinery means we can reliably manufacture alloys to strict design specifications and requirements from all over the world.

    #5 EMERGENCY MANUFACTURING SERVICE
    Our ‘Emergency Manufacturing Service’ for delivery within days
    Our usual delivery times are 3 weeks, however if an urgent order is required, our Emergency Manufacturing Service ensures your order is manufactured within days and shipped to your door via the fastest route possible.

    If you have an emergency situation and require products even faster, contact us with your order specification. Our technical and production teams will swiftly respond to your quote.

  • Write your message here and send it to us

    Main Products

    The product forms include wire, flat wire, strip, plate, bar, foil, seamless tube , Wire mesh, powder, etc., can meet the application needs of different customers.

    Copper Nickel Alloy

    FeCrAl Alloy

    Soft Magnetic Alloy

    Expansion Alloy

    Nichrome Alloy